TDS Meter Digital Water Tester, TDS EC & Temperature Meter 3 in 1, Ideal PPM Meter for Drinking Water, RO System Aquariums Swimming Pool and More, 0-9990 ppm meter
Digital EC Meter Conductivity Measurement Tester 3 in 1 EC/TDS / Temperature Meter Pen For Water GET YOUR WATER QUALITY READINGS IN SECONDS This meter shows the Total Dissolved Solids (TDS), Electrical Conductivity (EC), Temp °F, and Temp °C of any liquid within just a few seconds. Equipped with the latest sensors and titanium alloy electrodes, the factory-calibrated meter gives you TDS or EC readings straight out of the box. Provides accurate and reliable test readings: 3-In-1 Digital TDS meter provides accurate readings for TDS (Total Dissolved Solids) EC (Electrical Conductivity) and temperature. Professional, Accurate, and Precise 3-in-1 TDS, EC, and Water Temperature Meter. The TDS meter has automatic temperature compensation in measurement mode. 9 minutes no operation, the meter will automatically shut down. Save power, extend battery life 1.Multi-mode conversion: TDS EC meter instrument a total of 4 different modes, press the SHIFT key can be converted between different modes. Mode memory function, each boot mode is the default mode used before the shutdown 2.Locks your reading making it easy to record: Large, easy to read LCD screen and data-hold function makes reading and recording a snap. “HOLD” automatic locking, “SHIFT” automatic conversion, 5 minutes Automatic locks. Press the SHIFT key while the value is locked to view the measurement results for the different modes. The measurement time is rapid, due to the exquisite naked type sensors, 5 seconds complete 3.Pocket Size: TDS meter is a professional water level test instrument, the operation is simple, the appearance of fashion, small size and easy to put in your pocket! For today’s market volume is the smallest, lightest portable. Reasonable design, pen electrode can be directly inserted into the water solution, measured it. Compact size that enable you to take anywhere 4.Widely Use: Ideal for all water quality testing, water purification applications, waste water regulation, aqua culture, hydroponics, laboratory and scientific testing, pools, ecology testing, colloidal silver, water treatment and more. How to use:
- STEP 1: Remove the electrode protective cap before use
- STEP 2:Press the ON/OFF button, and immerse the meter into the solution. (The solution should not over the immersion line)
- STEP 3: After the numerical display is steady, press the HOLD button and take it out of the solution for checking the result
- STEP 4: Wipe clean the electrode after using, turn off the meter and replace the protective cap
Reviews
There are no reviews yet.